SAFEPACK VCI PRE-WASH SOLUTION SP-FE-WPW is a specially developed multipurpose solution having need-designed hi-tech VCI chemicals (volatile corrosion inhibitors) dispersed in water & solvent base. It is ideal for washing/rinsing ferrous metal components and parts after final operation and prior to packing and during in-process storage to protect them from corrosion.
Core Elements :
SAFEPACK VCI PRE-WASH SOLUTION SP-FE-WPW provides an effective method of protection for short duration both during in-process storage and after final operation till the product goes for packing. It protects metals through direct contact .
The high-tech VCI chemicals deposits on the metal surface and forms a protective mono-ionic layer which provides protection to the parts from corrosion. For optimum results it should be ensured that the parts are completely dried and then covered with a polythene sheet, plastic film or a laminated paper. It thus enables effective short term protection of ferrous metals against corrosion under adverse conditions including contaminants in air such as hydrogen sulphide, sulphur dioxide, ammonia or acid rain.
Features
Offers protection to a wide range of ferrous metals.
It has the property of neutralizing acidic radicals to an extent, that may be adhered on the metal surface.
Acts as a dewatering agent
It is a good cleaning/washing agent.
Designed for protection of internal as well as external metal surfaces.
It is fast drying.
Under normal conditions offers short term protection upto 1-2 weeks when covered with a suitable packaging material.
Mono-ionic VCI layer does not affect electrical /optical/mechanical surface properties
Gives short term protection during in-plant storage and transit.
Effective in polluted and humid atmosphere.
Not harmful to humans and is environment friendly.
Does not require activation prior to usage.
VCI layer is self-replenishing and replenishes itself when package is re-closed after opening for inspection or such other purpose.
TYPICAL PROPERTIES
Property
Units
Value
Color
Pale Brown
Viscosity
Sec
21
Specific Gravity
0.96
Coverage
sq. mtr/ltr
70
Specific gravity
0.90 to 0.97
pH
Alkaline (7.00+)
Corrosion Performance
As per MIL-2073ID
Passes 1 Cycle
Benefits
Gives value for money
Cost reduction by : reduced consumption of Labour, Materials & Time
Value added product / service
Peace of mind during shipping and storage
Less periodic maintenance
Extends product life
Metals Protected
Ferrous metals such as iron & steel, castings, forgings and pressed components.
Spectrum of Applications
SAFEPACK VCI ANTICORROSION PRE-WASH SOLUTION SP-FE-WPW is predominantly used for :
For in-plant short duration protection of steel coils/sheets/wires.
For in-plant short duration protection of Automobile components.
For in-plant short duration protection of metal pipes and tubes (both internal & external surfaces).
For in-plant short duration protection of castings, forgings, pressed components.
Is an effective medium for using in hydro-testing of Valves/Pumps instead of water.
Machined Parts & components.
Many more!
Method of usage
Clean the parts to be protected from dirt, dust and other contaminants.
For optimum effect complete drying of the parts should be ensured.
It can be applied either by dipping the components or spraying.
Stir the solution well before use.
Ensure complete drying of the components.
For optimum effect cover the components with a suitable packaging material such as a polythene sheet/bag.
Seal package well, though not necessarily air tight for maximum benefit.
Packaging & Storage Conditions
Store in a cool and dry place in a tightly sealed container.
Stable at normal storage conditions.
Keep away from contaminants prior to usage.
Store in original packing for optimum benefits.
SPECIFICATIONS & STANDARDS :
SAFEPACK VCI Anti Corrosion Prewash Solution “SP-M WPW” is available in following standard range :
